為什么空氣彈簧會損壞速度比較快?
The service life of the air spring is relatively short, most of the reasons are that you do not take good care of the air spring. Next, what are the methods to extend the service life of the air spring?
1, according to the provisions of installation: expansion, displacement, deflection must pay attention to avoid excessive conditions;
2, the use of air springs to pay attention to the selection of the corresponding joint media.To be specific, in the case of material connectors, some special media should be selected. It should be noted that the choice of different media connectors is not serial or universal.

3. Precautions for installation at height: in case of high-rise or suspended water supply, fix the pipe on the hanger, bracket or anchor;
4. Avoid parts exposure and high temperature.It is necessary to protect the air spring from the sun, wind, rain, etc.

5, the use of air springs to pay attention to the selection of the corresponding joint media.To be specific, in the case of material connectors, some special media should be selected. It should be noted that the choice of different media connectors is not serial or universal.
6. Before the first installation test or restart after a long period of disuse, attention should be paid to re-pressure and tighten the bolts before using them;
7、在安裝橡膠接頭時應注意防止壓力偏差,還要定期檢查是否有松動情況,否則會造成螺栓盤和滲漏的情況。
7, in the installation of rubber joints should pay attention to prevent pressure deviation, but also regularly check whether there is loose, otherwise it will cause bolt disc and leakage;

- 上一篇: 橡膠空氣彈簧有哪些你不知的分類
- 下一篇:空氣彈簧在工業領域的作用?